My Blog

Every now and then we receive pictures of a Power Wagon going above and beyond the call of duty.  This photo of Mark Cronin's M37 up in the mountains of Wyoming gives real meaning to the words, "tough trucks".   The stout little 3/4ton Dodge M37 is a real work horse and we thank Mark for sharing this photo with all of

Ok, so you don't know what to get your favorite Power Wagon enthusiast for Christmas?  Here is the perfect idea and just in time for the Holidays.  We had these Power Wagon bucket Tool Caddy's made up because every shop needs at least a couple of them(tools in picture included) Get yours ordered today

If you are needing a rebuildable 230 engine we do have some of them.      These engines will bolt up to any 230 bellhousing.  Before shipping the engine we remove the engine head and oil pan to check to see that there is no moisture damage.  We have limited quantity of these available, $750 plus shipping.  We also stock the necessary parts to rebuild these engines and have everything from bearings, gaskets, seals,valves, gears, and even New Old Stock 230 crankshafts.  If  you have any

The M-101 Trailer, Cargo, 3/4 ton is a single axle, two wheel, steel frame cargo trailer designed to be towed by a 3/4 ton or larger truck. A welded steel box body is bolted to the frame.   The M101 is designed to operate on all types of roads, cross-country terrain, and in all weather conditions. There are no restrictions on the M101 for movement over primary and secondary roads, however, it is restricted to a maximum speed of 15 mph when towed cross-country.

The M101 Trailer, Cargo, 3/4

Almost every old W100-W300 Dodge Power Wagon has a questionable drag link and now we can remedy that situation.   We  now have new drag links for the 1961-71 W100 and W200 and the 1965-71 W300 .   If you need one of these give us a call, after installing one you will feel a whole lot safer driving down t he

With over 25 years of experience, our shop can help you with some of the challenges that come with restoring or repairing an old Power Wagon.  Over the years our shop has seen many different Power Wagons.  Our shop has worked on Power Wagons from WWII to 1971 and many share common needs, primarily due to their age and neglect.  Currently we have been working on Bill Cooper's 1951 Power Wagon.  Bill found this nice Power Wagon up in Canada, and it needed some work which we have completed.   

If you've been looking for some hard to find parts for the 1946-50 Civilian Power Wagon, you will be happy to know that we will sell you the parts off of this Power Wagon.   This truck has a good used pickup box(SOLD) that was used by a fire department who put a rough hole in each bed side that can be easily repaired.  The left bed side fender is in decent shape and the right one has the rear bottom part rotted off.  Looking at the front of the truck it has a couple of nice complete

Last week we received a telephone call from Sherman and Will Day.  This Father and Son team had driven their M38A1 Jeep from New York to the Portland Oregon National Military Vehicle show and were in route home when their voltage regulator failed. 

  They were about 2 hours from us when they called to see if we had the part, we told them if they could get here we had the voltage regulator.  Sure enough they did show up and purchased and installed the new voltage regulator which took care of the

Early Colorado 1 ton Civilian Power Wagon $3750

Original T137 complete 230 engine compartment(engine turns free)

Frame, cab and box are straight

Gas tank and drive train complete

Good front windshield frame

Has Warn Lockout Hubs

Colorado Title

 

This Power Wagon is missing the glove box door and hinge ($39 used) and glove box ($45 new). It has a later power wagon speedometer, front bed panel is bowed and we have new ones available $250, drip rails are missing and we can sell new ones(

We have had many New Old Stock parts come in since Spring and thought that you would like to know about them. Some years ago it appears that an Asian winch company took the Braden LU-4 aluminum winch housings and copied them exactly casting their name, Hanil, into them. We have these WINCHES for the M37/M43 in good used condition $795 or New take offs $950. The internals on these winches appear to be identical to the LU-4.

Next we were lucky to find some New Old Stock Carter ETW-1